• <li id="00i08"><input id="00i08"></input></li>
  • <sup id="00i08"><tbody id="00i08"></tbody></sup>
    <abbr id="00i08"></abbr>
  • 新聞中心

    EEPW首頁 > 嵌入式系統 > 設計應用 > STC12C5410AD AD的測試LCD12864顯示程序

    STC12C5410AD AD的測試LCD12864顯示程序

    作者: 時間:2013-05-11 來源:網絡 收藏

    AD的測試
    #include .H>
    #include "stdio.h"
    #include "stdlib.h"
    #include "math.h"
    #include "absacc.h"
    #include "intrins.h"
    #include "string.h"

    #define Rssp_On 0x3f
    #define Rssp_Off 0x3e
    #define Col_Add 0x40
    #define Page_Add 0xb8
    #define Start_Line 0xc0

    sbit Rs = P1^7; //Data or Instrument Select
    sbit RW = P1^5; //Write or Read
    sbit Ce = P1^6; //6800 mode Enable single
    #define Lcd_Bus P2
    sbit Cs1 = P1^3; //Master chip enable
    sbit Cs2 = P1^4; //Slave chip enable

    unsigned char adbuf;

    unsigned char code han[]=
    {
    /*-- 文字: 值 --*/
    /*-- 宋體12; 此字體下對應的點陣為:寬x高=16x16 --*/
    0x80,0x40,0xF0,0x2F,0x02,0x04,0xE4,0xA4,0xB4,0xAF,0xA6,0xA4,0xE4,0x04,0x00,0x00,
    0x00,0x00,0xFF,0x00,0x40,0x40,0x7F,0x4A,0x4A,0x4A,0x4A,0x4A,0x7F,0x40,0x40,0x00,
    /*-- 文字: 電 --*/
    /*-- 宋體12; 此字體下對應的點陣為:寬x高=16x16 --*/
    0x00,0x00,0xF8,0x48,0x48,0x48,0x48,0xFF,0x48,0x48,0x48,0x48,0xF8,0x00,0x00,0x00,
    0x00,0x00,0x0F,0x04,0x04,0x04,0x04,0x3F,0x44,0x44,0x44,0x44,0x4F,0x40,0x70,0x00,

    /*-- 文字: 壓 --*/
    /*-- 宋體12; 此字體下對應的點陣為:寬x高=16x16 --*/
    0x00,0x00,0xFE,0x02,0x42,0x42,0x42,0x42,0xFA,0x42,0x42,0x42,0x62,0x42,0x02,0x00,
    0x20,0x18,0x27,0x20,0x20,0x20,0x20,0x20,0x3F,0x20,0x21,0x2E,0x24,0x20,0x20,0x00,

    /*-- 文字: 專 --*/
    /*-- 宋體-方正超大字符集11; 此字體下對應的點陣為:寬x高=16x16 --*/
    0x00,0x00,0x80,0x90,0x90,0xF0,0x9C,0x90,0x90,0x90,0x90,0x88,0x40,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,0x03,0x02,0x12,0x22,0x72,0x0A,0x06,0x02,0x00,0x00,0x00,0x00,

    /*-- 文字: 注 --*/
    /*-- 宋體-方正超大字符集11; 此字體下對應的點陣為:寬x高=16x16 --*/
    0x20,0x40,0x84,0xE8,0x20,0x20,0x20,0x22,0x24,0xE8,0x20,0x20,0x20,0x00,0x00,0x00,
    0x00,0x38,0x46,0x01,0x00,0x42,0x42,0x42,0x42,0x7F,0x42,0x42,0x42,0x42,0x00,0x00,

    /*-- 文字: 于 --*/
    /*-- 宋體-方正超大字符集11; 此字體下對應的點陣為:寬x高=16x16 --*/
    0x00,0x80,0x84,0x84,0x84,0x84,0x84,0xFC,0x84,0x84,0x84,0x84,0x84,0x80,0x00,0x00,
    0x00,0x00,0x00,0x00,0x00,0x40,0x40,0x7F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

    /*-- 文字: 消 --*/
    /*-- 宋體-方正超大字符集11; 此字體下對應的點陣為:寬x高=16x16 --*/
    0x00,0x20,0x40,0x84,0x60,0x00,0xC8,0x30,0x40,0x3E,0x40,0x30,0x48,0xC0,0x00,0x00,
    0x00,0x00,0x7C,0x03,0x00,0x00,0x7F,0x09,0x09,0x09,0x09,0x89,0x89,0x7F,0x00,0x00,

    /*-- 文字: 費 --*/
    /*-- 宋體-方正超大字符集11; 此字體下對應的點陣為:寬x高=16x16 --*/
    0x00,0x00,0xE8,0xA8,0xA8,0xE8,0x9C,0xA8,0xA8,0xFC,0xA8,0xA8,0xB8,0x80,0x00,0x00,
    0x00,0x80,0x84,0x9E,0x85,0x44,0x24,0x1C,0x24,0x25,0x24,0x5E,0x42,0x01,0x00,0x00,

    /*-- 文字: 類 --*/
    /*-- 宋體-方正超大字符集11; 此字體下對應的點陣為:寬x高=16x16 --*/
    0x00,0x20,0x20,0x20,0xA8,0x50,0x20,0xFC,0x20,0x50,0xAC,0xA0,0x20,0x00,0x00,0x00,
    0x80,0x82,0x8A,0x49,0x48,0x28,0x19,0x06,0x18,0x28,0x28,0x48,0x49,0x84,0x00,0x00,

    /*-- 文字: 控 --*/
    /*-- 宋體-方正超大字符集11; 此字體下對應的點陣為:寬x高=16x16 --*/
    0x00,0x20,0x20,0xFC,0x20,0x20,0x30,0x90,0x54,0x1C,0x10,0x50,0xB0,0x10,0x00,0x00,
    0x00,0x44,0x82,0x7F,0x01,0x01,0x81,0x84,0x84,0x7C,0x84,0x84,0x84,0x41,0x00,0x00,

    /*-- 文字: 制 --*/
    /*-- 宋體-方正超大字符集11; 此字體下對應的點陣為:寬x高=16x16 --*/
    0x00,0x60,0x9C,0x90,0x90,0xFC,0x90,0x90,0x50,0x80,0xF8,0x00,0x00,0xFC,0x00,0x00,
    0x00,0x00,0x3E,0x02,0x02,0x7F,0x22,0x3E,0x02,0x00,0x0F,0x40,0x40,0x3F,0x00,0x00,
    };

    萬能遙控器相關文章:萬能遙控器代碼



    上一頁 1 2 3 下一頁

    評論


    相關推薦

    技術專區

    關閉
    主站蜘蛛池模板: 丘北县| 宁陵县| 汉源县| 石楼县| 青海省| 普定县| 天峨县| 乐安县| 绥滨县| 恩平市| 襄城县| 岐山县| 汨罗市| 汉川市| 萝北县| 田林县| 静宁县| 沽源县| 如东县| 响水县| 团风县| 湄潭县| 鄱阳县| 湄潭县| 新蔡县| 泾川县| 饶河县| 新晃| 阜南县| 泰来县| 金阳县| 诸暨市| 东宁县| 怀化市| 通州区| 全椒县| 桐城市| 正蓝旗| 延安市| 容城县| 乐亭县|