如何將系統軟硬件環境帶到合適狀態解析方案

例如，F(xiàn)lash燒寫命令封裝如下：

CMD_TBL_FLASH

{flash,DoWriteToFlashBlocks,

flash {loader/kernel/root} {block1/.../block16}

Copy to Flash from SDRAM of Area.

flash [dest] [src] [len]

Copy to Flash from src to dest. ,

flash {loader/kernel/root} {block1/.../block16}

Copy to Flash from SDRAM. ,

flash {loader/kernel/root} {block1/.../block16}

Copy to Flash from SDRAM of Area.

flash [dest] [src] [len]

Copy to Flash from src to dest.

}

其中，flash是其命令字;DoWriteToFlashBlocks為其處理方法的方法名;flash {loader/kernel/root} {block1/.../block16}和flash [dest] [src] [len]為其命令的使用格式(其中“{}”內為可選項，“[]”內為必選項)。

2.2 BootLoader改進實驗

此次改進就是在原有BootLoader的基礎上，增加對移動存儲介質SD卡以FAT格式進行讀取數據的指令來實現的。命令封裝如下：

CMD_TBL_SD_READ

{readSD, DoReadFromSDBlocks,

readSD [filename] [addr] Read data from SD to SDRAM for startup. ,

readSD [filename] [addr] Read data from SD to SDRAM for startup. ,

readSD [filename] [addr] Read data from SD to SDRAM for startup.

}

其功能是，在SD卡中把指定目錄下的內核文件提取到SDRAM區域中，從而完成內核的加載。